6-6-2012: World IPv6 Launch — the future is forever

▼ Ten years ago, on 6 June 2012, the Internet Society organized World IPv6 Launch. A year earlier, we'd had World IPv6 Day, where many (large) organizations added IPv6 addresses for their websites to the DNS for 24 hours, in order to see if that would create problems. That went mostly smoothly, with a few surprises, so a year later it was time to turn on IPv6 for real. Time for a blog post looking back on worldipv6launch.org.

I thought this would be a good excuse to do what I've done with some regularity over the years: see how well things work when I turn off IPv4 on my home network.

The IETF tried this at is meeting in March of 2008 for an hour on its meeting network, with interesting results. Back then, Windows XP was still the most widely used operating system, and although Windows XP does support IPv6, it doesn't support DNS lookups over IPv6. So the Windows XP users were left out in the cold or had to apply complex workarounds.

By the early 2010s, all operating systems had mature IPv6 implementations, but very few websites and other online services were IPv6-enabled. So with IPv4 turned off, you couldn't do much. Since then, that's gotten a lot better. And it took a while, but many (most?) ISPs now routinely provide IPv6 connectivity along with IPv4.

I initially tried to turn off IPv4 on my home router, but no dice: you can turn off IPv6, but not IPv4. So I replaced the home router that came with my FTTH service with a Mikrotik, which has no such limitations.

The good news is that my main networked devices all had no issue using IPv6: my Macs, iPhone, iPad, AppleTV 4K and LG TV. Not sure about my Onkyo receiver, but I never use any networked services on that anyway. My Sony UHD blu-ray player wouldn't run its Netflix app or software update check over IPv6, but the IPv6 version of the built-in network connectivity checker was happy with the connectivity. In the settings it said IPv4 had priority over IPv6, but no way to change that. Strange.

On the LG TV and the AppleTV most of the video streaming apps work fine over IPv6. Not Amazon Prime or the Dutch public broadcasting apps, though. Podcasts are pretty bad. I found four IPv6-related podcasts, and only two of them would load over IPv6. And of all the others I tried, just one.

Websites are hit and miss. It seems especially the big ones served up by content delivery networks work over IPv6, while web based applications often don't work over IPv6. Annoying examples are Twitter and Fastmail. Third party iPhone and iPad apps are also somewhat underperforming. Podcast player Pocket Casts will sync over IPv6, but as noted, most podcasts won't load over IPv6. Overcast doesn't sync over IPv6. Dutch public transport planning apps also didn't work.

Although most of Apple's stuff has supported IPv6 for years, controlling smart home devices through Homekit remotely (over the internet) doesn't work with just IPv6. And Siri doesn't work over IPv6.

Right now, if you're an IPv4-only user (or content provider) that doesn't cause any problems. It's up to the IPv6-only users to figure out a way to reach the IPv4 world. It will be interesting to see how long it takes before we reach the tipping point where this flips and important services are only available over IPv6, so IPv4 users have to find a way to talk to the IPv6 world. I'm guessing not very soon.

Ok, time to turn IPv4 back on so I can listen to some podcasts.

Permalink - posted 2022-06-07

Review: A500 Mini, F710 game controller, PETSCII Robots

▼ The A500 Mini, the Logitech F710 and Attack of the PETSCII Robots: an excellent combination. So let me cover all three in a single review.

The A500 Mini

Shortly after its release, I wrote a first take on the A500 Mini, a shrunken down, modernized reincarnation of the Amiga 500 for playing games.

A big limitation of the original firmware was that it didn't support disk emulation with ADF disk images. The only (official) way to get other software than the included 25 games on the device was WHDLoad. WHDLoad is a great system for running older games, especially floppy-based ones, but as a regular user you depend on others to make WHDLoad "slaves" that make it possible to load various software.

But with the latest firmware, the A500 Mini will let you boot off of an ADF disk image, and switch between different preselected ADF images afterwards. So this way, it's possible to run any floppy-based Amiga software. Writing to the disk images works, so you can even save your work.

Logitech F710 wireless game controller

When I learned that the A500 Mini works with the Logitech F710 wireless game controller, I immediately got one to replace the wired controller that comes with the A500 Mini. Before this, I never played games using a controller like this, so I have nothing to compare it to apart from the one that comes with the A500 Mini. Compared to that one, the F710 is a lot heavier and feels good to hold. It has a few extra buttons in the middle and two analog sticks. It can also "rumble". Strangely, the A/B/X/Y buttons are in the same place, but have different colors.

Initially, the F710 didn't work with the THEC64 Mini or Maxi, or with my Mac. But it turns out that you can trick the F710 to start up in a more compatible mode. For this, the switch on the back must be in the "a" position and the USB receiver dongle must be unplugged. Then remove the batteries and put them back in and plug the USB receiver into the computer. Then, the F710 shows up on my Mac as a "Logitech Cordless RumblePad 2" and it's much more compatible. If you don't go through this steps and/or after reactivating the F710 after it goes into sleep mode, it shows up as a "Wireless Gamepad F710" in the list of USB devices.

It looks like the A500 Mini is not picky about mice, I was able to use my Logitech mouse using the unifying receiver without issue. (Of course it would have been too easy if the F710 and the mouse had been able to share the same receiver dongle...)

Attack of the PETSCII Robots

As a subscriber to David Murray's "The 8-Bit Guy" Youtube channel, I had already seen him talk about his game "Attack of the PETSCII Robots", probably the most ambitious game ever made for the Commodore PET computer from 1977. He then proceeded to make versions for other Commodore 8-bit computers and people started offering to port the game to other platforms. Right now the list of computers the game runs on is:

• Sega Genesis
• Commodore Amiga
• Sony PlayStation Portable
• Commodore 128
• Commodore Plus/4
• Commodore 64
• Apple II
• Atari 800
• Commodore PET
• Commodore VIC-20
• Sinclair ZX-Spectrum
• Commander X16

So I bought the download-only Amiga version for $10. (The shipping on other purchase options was too steep for me.) For that, you get an ADF image that you can write to a floppy and the game will boot from that floppy. You also get a WHDLoad installable version and the floppy includes the green monochrome PETSCII version of the game.

Attack of the PETSCII Robots was originally created to work with a keyboard, as it's hard to make the "move in some direction" and "shoot in some other direction" actions both work well with just a joystick. However, the Amiga version also supports the CD32 controller... which is not unlike the A500 Mini controller or the F710!

So when you start the game, just select "CD32" as the controller, and you can do everything you need without needing a (virtual) keyboard. And go into the game settings on the A500 Mini and tell it the second joystick port has a CD32 controller connected to it.

This makes playing the game better on the A500 Mini than on a real Amiga. Well, you get the same benefit on a real Amiga if you have a CD32 controller, and a compatible one comes with some purchase options of the Amiga version of the PETSCII Robots game.

I was stuck on the first map (level) for a while, trying to figure out the gameplay. David's Petscii Robots Gameplay Tutorial came when I had already figured out some stuff on my own, but it was still helpful.

After getting past the first map, the rest was a lot of fun trying to figure out creative ways to lead the robots to their demise. Just one or two maps gave me problems, as I needed to go through lots of steps before I got to the part where I couldn't figure out what to do. So in those cases, I used the "save game" feature of the A500 Mini so I could restart without having to go through the same five minute run to collect weapons and keycards each time.

I think the game could benefit if it would be a bit easier to get through that first map. Maybe give the player hints after some time has passed?

Recently, some "shareware" versions (i.e., free demos limited to two maps/levels) were released for a number of platforms, so you can try out the game without shelling out your hard earned money immediately.

Conclusions

The A500 Mini is a really nice little device for playing Amiga games, especially if you want to do so on your living room TV. With ADF support, you can now boot into the Workbench or floppy-based applications for some nostalgia (did anyone say "DPaint"?), but it won't replace a real Amiga for non-game use.

I have no idea if other game controllers are better, and having to do the unplug USB / remove batteries dance when I want the F710 to work on my Mac or the THEC64 is pretty annoying, but the Logitech F710 is a lot nicer than the A500 Mini's game controller, and the A500 Mini supports the F710 without any issues.

Attack of the PETSCII Robots is a very nice game, even for those of us who are not really into gaming, as it's about trying to figure out how to deal with situations rather than having quick reflexes. Can we have some more maps/levels, please?

Permalink - posted 2022-06-05